RADIO-ENERGIE RE0-444R1C/CA Tacho Generator 0.06V

Buy online your RADIO-ENERGIE RE0-444R1C/CA Tacho Generator 0.06V reference RE0-444R1C/CA 0.06V/tr/mn from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.

Built by RADIO-ENERGIE in France, this RE0 series tacho generator provides reliable analog speed feedback for legacy CNC machines, DC drives and older servo systems. It delivers a proportional DC signal for closed-loop velocity control, ideal for CNC replacement, retrofit work and industrial maintenance where stable spindle or axis speed feedback is required.

The unit converts shaft rotation into a clean DC voltage used by analog velocity loops. Maintenance teams use this generator to stabilize spindle regulation, restore axis speed control and maintain correct drive tuning when a previous sensor fails. Its compact format and proven RE0 mechanical design simplify coupling to motor or spindle shafts through a standard flexible coupling or appropriate adapter in common shop-floor setups.

In typical installations the output is wired directly to the drive or controller tach input, where polarity indicates direction and amplitude tracks RPM. The RE0-444R1C/CA variant is identified as the 0.06V model code (0.06V/tr/mn), which helps technicians match the correct voltage constant and rotation characteristics during replacement. This makes it a practical spare part for legacy analog DC drives and classic servo controllers still widely used on older lathes, milling machines, grinders and winding equipment.

Technicians value the RE0 family for consistent signal linearity at working speeds and robust build quality suited to industrial environments. When used as a replacement unit, it supports quick field restoration of velocity feedback without re-engineering the control loop, provided the original coupling dimensions and voltage constant are observed.

Reference: RE0-444R1C/CA 0.06V/tr/mn

Manufacturer: RADIO-ENERGIE

Product type: Tacho generator for analog speed feedback

Main function: Provides a DC signal proportional to shaft speed for velocity control in CNC and industrial drives

Applications: Spindle regulation, feed axis velocity feedback, retrofits on analog DC drives, service replacements on legacy CNC machinery

Key technical data: RE0 series variant identified as 0.06V (0.06V/tr/mn), two-wire DC output for tach input, compact body suited for motor or spindle coupling, French manufacturing, commonly sourced as a spare for maintenance and retrofit needs, immediate shipment depending on order processing

Field use often involves drop-in replacement of a worn or noisy tachogenerator to eliminate unstable speed, hunting at low RPM or drive faults tied to poor velocity feedback. Keeping a stocked spare on the shelf reduces machine downtime and supports preventive maintenance on older machines that rely on analog tach feedback rather than encoders.

Units are checked on appropriate test benches or simulators by skilled engineers to verify output behavior, polarity and smoothness across a working speed range. Each item is packed with shaft protection and industrial-grade cushioning for safe transit. Warranty and repair service or exchange service options may be available depending on condition and sourcing channel.

For legacy and obsolete parts, this model is a dependable emergency spare that helps cut unplanned downtime and keep older CNC installations operational. Cnc-shopping can assist with sourcing, refurbished units and worldwide shipping to support long-term machine reliability.

Frequently asked questions about RE0-444R1C/CA:

How do I confirm compatibility with my drive or controller?
Check the required tach voltage constant and rotation polarity in your machine or drive manual, then match them to the RE0-444R1C/CA specification. Verifying shaft size and coupling style ensures mechanical fit without modification.

Can this replace an older sensor with different voltage constant?
Yes, but your drive’s velocity gain may require retuning if the voltage constant differs. For a true drop-in swap, select a unit that matches the original constant and mechanical coupling.

What wiring is typically used for this tacho generator?
Most installations use a simple two-wire connection directly to the tach input of the analog drive. Observe polarity, as reversing the leads will invert the indicated direction.

Is it suitable for spindle as well as feed axis feedback?
It is commonly applied to both, provided the mechanical coupling and required voltage constant match the machine’s specification. Many legacy spindles and axes still rely on a tacho input for stable velocity control.

What should I check when replacing my existing unit?
Confirm the model code, voltage constant marking, rotation sense, mounting and shaft coupling details. Inspect the coupling and keyway for wear and replace if needed to prevent vibration and signal ripple.