Enter your destination to get a totals estimate.
MITSUBISHI MR-J2S-10B AC Servo Amplifier 100W 200V SSCNET
Starting at €270.00 €270.00
Buy online your MITSUBISHI MR-J2S-10B AC Servo Amplifier 100W 200V SSCNET reference MR-J2S-10B from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.
This MITSUBISHI ELECTRIC servo amplifier from the MELSERVO-J2-Super family is a compact 100 W unit for axis control over SSCNET. It drives matched MELSERVO motors in CNC and automation cabinets and serves as a reliable replacement unit or spare part for legacy Mitsubishi motion systems where consistent positioning performance and stable loop control are required.
The MR-J2S-10B operates as a networked amplifier under an SSCNET motion controller, handling current and velocity control for a 100 W servomotor with a rated output of 170 V and a drive frequency range of 0 to 360 Hz. It accepts 200 to 230 Vac mains at 50 or 60 Hz, with typical input ratings of 0.9 A when supplied from three phase and 1.3 A on single phase lines. This configuration is well suited for compact axes such as small feed drives, indexing tables and transfer mechanisms where the 100 W class is common.
Integration is through SSCNET, which means command and feedback exchange is managed by the Mitsubishi motion controller rather than pulse or analog command wiring. The unit aligns with HC-KFS, HC-MFS and HC-UFS motor series in the 100 W range, allowing straightforward service swaps in existing panels that already use MELSERVO J2 Super hardware. Panel mounting and cabinet wiring follow standard MELSERVO practice, which helps maintenance teams carry out fast field replacement with minimal rework.
In many CNC machine tools and automated stations using Mitsubishi motion, this model is chosen to keep legacy axes operational without reengineering the network or controller program. Where a failed amplifier has halted an axis, a refurbished unit of this reference restores motion control quickly once configured to the original settings.
Reference: MR-J2S-10B
Manufacturer: MITSUBISHI
Product type: MITSUBISHI Servo drive MR-J2S
Main function: AC servo amplifier for 100 W MELSERVO motors with SSCNET interface for controlled positioning and speed regulation
Applications: Axis control on CNC lathes and milling machines, pick and place units, feeders and general factory automation using Mitsubishi motion controllers
Key technical data: 200 to 230 Vac supply at 50 or 60 Hz, single phase or three phase input. Rated input current 1.3 A on single phase and 0.9 A on three phase. Output 170 V, 0 to 360 Hz, 1.1 A for a 100 W motor. SSCNET network interface. Part of the MELSERVO-J2-Super series. Works with HC-KFS, HC-MFS and HC-UFS motor families. Made in Japan.
For industrial maintenance and retrofit tasks, this model is commonly sourced as a CNC replacement component to limit machine downtime. Keeping a tested unit on the shelf is a practical strategy for sites running J2 Super networks, since the footprint and wiring are familiar to service technicians and the controller side remains on SSCNET.
Each refurbished unit is function checked by skilled engineers on CNC simulators with matched servo motors, including run tests, alarms verification and communication checks on SSCNET. Items are packed in ESD-safe materials and foam for transit protection, with warranty included. Worldwide shipping is available with fast dispatch depending on availability.
This model is often used as an emergency spare for older Mitsubishi motion systems where new stock is limited or the part is considered an obsolete part. Cnc-shopping can support repair service or exchange service when suitable, helping extend the working life of existing machines without a full control upgrade.
Frequently asked questions about MR-J2S-10B:
How does the B type differ from other variants in the MR-J2S family
The B type uses SSCNET network control from a Mitsubishi motion controller. It is not a pulse train or analog commanded version, so selection must match the controller interface already installed.
Which motors can be paired with this 100 W amplifier
It is designed for compatible 100 W motors in the HC-KFS, HC-MFS and HC-UFS series. Match motor capacity and feedback type per Mitsubishi documentation for the exact motor code on your machine.
Can it run from single phase power
Yes, it accepts 200 to 230 Vac single phase at 50 or 60 Hz with a rated input current of 1.3 A. Three phase at 200 to 230 Vac is also supported with a rated input current of 0.9 A.
What should be checked when replacing a failed unit
Confirm model code, power rating and SSCNET connectivity. After installation, verify addressing and parameters in the Mitsubishi controller so the axis resumes operation with the original motion program.
Is this suitable for retrofit work on legacy machines
Yes, it is frequently used in retrofit and maintenance projects on systems already running MELSERVO J2 Super hardware. It allows network compatible replacement without changing the controller platform.
| Availability | Immediate shipment |
|---|---|
| Weight | 2.50 kgs |
-
DHL ExpressFind out moreDHL Worldwide Express - 24H/48H Express delivery to 220 countries, delivered against Proof of Signature. - Tracking Number to track it on DHL network. -
UPS ExpressFind out moreUPS Worldwide Express - 24H/48H Express delivery to 220 countries, delivered against Proof of Signature. - Tracking Number to track it on UPS network.
-
DHL SelectFind out moreStandard delivery by DHL Select for EUROPE only (48H-72H depending of your country in EUROPE) with Proof of Signature at the delivery. - Tracking Number to track it online on DHL network. -
Colissimo Intl.Find out moreEconomy/Standard International post (4 to 7 days, depending of your country) Delivered with a proof of signature. Tracking Number is provided for traceability on the French Colissimo postal network & your Country local postal service.

