ALLEN BRADLEY 2711R-T10T PanelView 800 HMI Terminal 10" 24VDC 14W

Buy online your ALLEN BRADLEY 2711R-T10T PanelView 800 HMI Terminal 10" from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.

The ALLEN-BRADLEY 2711R-T10T is a PanelView 800 HMI operator terminal designed to provide a clear and reliable interface between operators and PLC or CNC control systems. It is used for machine status visualization, alarm management, setpoint entry, diagnostics and operator commands in industrial automation and machine-tool applications.

This Allen-Bradley HMI features a 10-inch touchscreen for displaying process screens, alarm pages, machine status and control information. It operates from a 24 VDC power supply with approximately 14 W power consumption, making it suitable for installation in existing industrial control cabinets and CNC panels.

The 2711R-T10T is commonly integrated into systems using Allen-Bradley PLCs, including Micro800 and MicroLogix-based applications. Its panel-mounted design allows practical installation in machine enclosures and makes it suitable for CNC machines, assembly stations, material handling equipment, process systems and retrofit projects.

The complete reference 2711R-T10T is a practical replacement unit, spare part or CNC replacement component for installations where the original HMI has developed touchscreen faults, display problems, reduced backlight performance or communication issues. Matching the exact reference helps maintain the existing panel configuration and minimize rewiring and commissioning time.

Each unit supplied by Cnc-shopping can be tested on dedicated HMI and PLC test equipment to verify display operation, touchscreen response and communication functions before shipment. Units are securely packaged using antistatic protection for industrial transportation and supplied with a commercial warranty, with worldwide shipping and fast dispatch depending on availability.

The ALLEN-BRADLEY 2711R-T10T can also be kept as an emergency spare in industrial spare inventory to reduce downtime following an unexpected HMI failure. Cnc-shopping can assist with sourcing obsolete Allen-Bradley parts and may provide repair or exchange services when applicable, helping extend the service life of legacy CNC and PLC installations.

Frequently asked questions about 2711R-T10T:

Is this unit suitable for Micro800 and MicroLogix projects?
Yes, this family is commonly deployed with those controllers in panel applications. Project engineering is typically handled in Connected Components Workbench, which streamlines setup and maintenance.

What supply should the panel provide?
The terminal is designed for a regulated 24 VDC rail with a typical draw near 14 W. Allow headroom on the supply for inrush and other 24 V loads in the enclosure.

Can it replace another 2711R-T10T one-for-one?
For a like-for-like swap the mechanical fit and wiring remain essentially the same. Load the appropriate project file and perform functional checks to restore operation.

Does it communicate over Ethernet?
Models in the PanelView 800 line are widely used on Ethernet-based PLC panels. Verify the exact communication settings in your project and controller to ensure a smooth handover.

What if I am replacing an older PanelView Standard or Plus?
This unit is not a direct plug-in for legacy families. A project conversion and wiring review are typically required, and our team can support selection of a suitable refurbished unit or repair service when needed.