Enter your destination to get a totals estimate.
A06B-0115-B104#0037 Fanuc Ac Servo Motor BiS0.5/6000
Starting at €800.00 €800.00
Buy online your A06B-0115-B104#0037 Fanuc Ac Servo Motor BiS0.5/6000 reference A06B-0115-B104#0037 from our e-store Cnc-shopping, specialist in CNC machine-tools spare parts.
This FANUC AC servo motor from the Beta series is a compact axis motor used to restore accurate motion on CNC machines when an original unit has failed or is showing encoder related faults. Commonly sourced as a replacement motor for machine tools and automation equipment, it supports fast field replacement and long-term maintenance of installed FANUC systems, including legacy configurations where new OEM supply is limited.
Identified as BiS0.5/6000, this motor is typically selected for applications that require high-speed axis control with stable feedback and consistent holding performance when stopped.
The motor is built for industrial machine environments and specified with IP65 protection, which helps in shops where coolant mist, fine chips, and washdown practices can reach the motor body and connector area. With a straight shaft configuration, it matches common coupling and pulley arrangements used on FANUC-equipped machining centers and special-purpose machines, keeping mechanical adaptation work to a minimum when the correct reference is used.
As a 3-phase AC servo motor, it is designed to operate with the matching FANUC servo amplifier family used on Beta axis systems. For replacement projects, the practical checkpoint is always the full reference and suffix, since brake options and feedback variants can differ across close part numbers even when the frame size looks similar.
Reference: A06B-0115-B104#0037
Manufacturer: FANUC
Product type: FANUC Servo Motor AC Model Beta
Country of manufacture: Japan
Key technical data: 0.65 Nm rated torque class, Speed of 6000rpm, BiS0.5/6000 motor designation, 3-PH supply via compatible FANUC servo amplifier (Alpha or Beta), IP65 enclosure rating, straight shaft for load holding and axis securing.
In production plants, this motor is usually replaced after insulation degradation, connector damage, or feedback-encoder related alarms that cannot be resolved with cable and amplifier checks. Keeping a correct CNC replacement component on the shelf is a common strategy for maintenance teams running older FANUC machines, since a failed axis motor can stop a whole line even when the control and amplifier are still healthy.
For rebuild shops and OEM support teams, the right reference helps avoid rework on couplings, brackets, and parameters. When the machine has multiple similar Beta motors, matching the exact code is also the fastest way to maintain axis balance and repeatability without mixing brake and speed variants.
Each unit is handled as an industrial spare part and can be checked by skilled engineers using CNC simulators with servo motors to verify basic electrical behavior and brake operation before dispatch. Packaging is done for industrial transport to reduce the risk of shaft and connector damage during shipping, and warranty terms depend on the selected condition and service level.
This reference is frequently used as an emergency spare to reduce unexpected downtime on installed FANUC Beta axis systems. Cnc-shopping supports sourcing of obsolete CNC parts and, depending on the case, repair service or exchange service can be considered to keep older machines running without redesigning the axis package.
Frequently asked questions about A06B-0115-B104#0037:
Does this motor include a holding brake?
NO, this Fanuc Servo motor version is specified with NO Holding brake. When replacing a motor on a vertical axis, confirm the brake option matches the original reference to avoid machine interlock and safety circuit issues.
What does IP65 mean in a machine-tool environment?
IP65 indicates strong protection against dust ingress and resistance to water jets. In practice it helps in CNC shops where coolant mist and chip contamination are common around axis motors, especially near way covers and splash zones.
Can I replace a similar Fanuc Beta motor with a different suffix?
It is not recommended to substitute close part numbers without verification. Small reference changes can mean different brake configuration, speed rating, or feedback type, which can lead to alarms or mismatch with the installed FANUC amplifier and machine documentation.
| Availability | Immediate shipment |
|---|---|
| IP | IP65 |
| Number of phases | 3-PH |
| Speed | 6000rpm |
| Motor shaft type | Straight |
| Brake | No Brake |
| Torque | 0.650000 |
| Weight | 3.00 kgs |
-
DHL ExpressFind out moreDHL Worldwide Express - 24H/48H Express delivery to 220 countries, delivered against Proof of Signature. - Tracking Number to track it on DHL network. -
UPS ExpressFind out moreUPS Worldwide Express - 24H/48H Express delivery to 220 countries, delivered against Proof of Signature. - Tracking Number to track it on UPS network.
-
DHL SelectFind out moreStandard delivery by DHL Select for EUROPE only (48H-72H depending of your country in EUROPE) with Proof of Signature at the delivery. - Tracking Number to track it online on DHL network. -
Colissimo Intl.Find out moreEconomy/Standard International post (4 to 7 days, depending of your country) Delivered with a proof of signature. Tracking Number is provided for traceability on the French Colissimo postal network & your Country local postal service.

