Telemecanique Altivar 28 speed controller for asynchonous motors for sale online on Cnc-shopping. The reference of this
SCHNEIDER ELECTRIC drive is
ATVHD12N4. The power is
7,5 KW (10HP). This
TELEMECANIQUE ATVHD12N4 is ready to replace your defective Altivar 28 on your machine tools and comes with a warranty.
A PLC program is generally executed repeatedly as long as the controlled system is running. The status of physical input points is copied to an area of memory accessible to the processor, sometimes called the "I/O Image Table". The program is then run from its first instruction rung down to the last rung. It takes some time for the processor of the PLC to evaluate all the rungs and update the I/O image table with the status of outputs.[5] This scan time may be a few milliseconds for a small program or on a fast processor, but older PLCs running very large programs could take much longer (say, up to 100 ms) to execute the program. If the scan time was too long, the response of the PLC to process conditions would be too slow to be useful. TELEMECANIQUE ATVHD12N4