FANUC DC Servo motor
A06B-0652-B012. This is a
FANUC motor
model 20M. The speed is 1500 rpm, torque 23Nm, 18 Amp, 2 phases/213 Volts. This FANUC DC motor with
straight shaft. This motor includes a FANUC Pulse coder 2500 pulses
A860-0300-T002. Each
FANUC Motor A06B-0652-B012 is
tested and have a
warranty. Motor driven by
FANUC DC Servo drives. This FANUC DC Motor is ready to replace your defective motor from your CNC Machine-Tools, usually fitted on FANUC 6 CNC or first generation of FANUC 11 CNC.
Excessive heat is both a cause of
FANUC DC Motor failure and a sign of other motor problems.
The primary damage caused by excess heat is to
increase the
aging rate of the insulation. Heat beyond the
insulation's
rating shortens winding life. After overheating, a
motor may
run satisfactorily but its useful life will be
shorter. For
maximum motor life, the cause of overheating should be
identified
and eliminated. Check your OVERLOADED DRIVE Machine, excess loads or jams in the driven machine for the FANUC DC Servo motor to supply higher torque, draw more current and overheat. A06B-0652-B012
Payment conditions
