A06B-0178-B275 Fanuc Motor Alpha 30/3000HV Brake

FANUC AC Servo motor type FANUC A06B-0178-B275. This is a FANUC Model Alpha 30/3000HV motor. The speed is 2000 rpm. This FANUC Alpha HV A06B-0178-B275 motor with 24 volts brake has a straight shaft , installed with a FANUC Alpha A64 Pulse coder. This FANUC HV Motor is fitted with Servo drive type FANUC SVM-60HV and also twin/triple axis FANUC Servo Amplifier HV 6085 6097. Each FANUC HV Motor is tested and comes with a warranty. This FANUC HV Alpha motor is ready to replace your defective part. A06B-0178-B275.

The FANUC α (HV) series AC servo motors A06B-0178-B275 can be driven only by the FANUC servo amplifiers for 400 to 460 VAC. The brake in the motor is used to hold the machine when the seCrvo motor control is OFF. It is possible to brake the machine by turning OFF the brake power in an emergency stop or during a power interruption. However, it is impossible to use this brake to reduce the stop distance in normal operation. Allow sufficient time to start the servo motor before releasing the brake. CNC-Shopping website . Don’t use the brake as an aid for the axis to stop at the same position for a long time, such as an index table. Turn the servo off when holding the axis by the built-in brake or another holding means. At this time, allow sufficient time to set the brake before turning off the servo. A06B-0178-B275