OMRON C200H-CPU01-E Programmable Controller CPU01 CPU Unit

Buy online your OMRON CPU Unit reference OMRON C200H-CPU01-E (C200HCPU01E C2OOH-CPUO1-E) directly from Cnc-shopping.com. This is an OMRON C200H-CPU01-E CPU module belongs to the automation system type OMRON SYSMAC C200H. This OMRONC200H-CPU01-E CPU module is usually with an OMRON C200H-BAT09 PLC Battery 3V available for sale separately online through our Cnc-shopping e-store.

This OMRON C200H-CPU01-E processor module is ready to replace the defective or broken down C200H-CPU01-E CPU Unit installed on your CNC machine-tools or any automation equipment.

OMRON C200H-CPU01-E CPU module comes with a warranty.

CPU models are equipped with two connectors for peripheral devices. One is used for the Handheld Programming Console or the Data Access Console; the other is used for the CPU-Mounting Programming Console.

The data that you wish to store in an EPROM Unit must first be written to an EPROM Chip, using the PROM Writer. Then the EPROM Chip must be mounted to the inside of the EPROM Unit. Once this has been done, the data cannot be changed. In addition, the data will be retained indefinitely when the power is turned OFF. Data can be stored in the EEPROM Unit while the Unit is mounted to the PC. The data is retained indefinitely when the power is turned OFF. Data can be randomly written to and read from the RAM Unit. However, the Unit requires battery or capacitor back-up in order to retain the information when the power is OFF. Units with battery back-up can retain their data for approximately five years at room temperature (25°C). Units with capacitor back-up retain their data for approximately 20 days at room emperature, but the length of time varies with temperature as shown below. OMRON C200H-CPU01-E